Ganter - Clamping elements, clamping screw with hexagon socket
Available in 7 variations
Available in 7 variations
- Durchmesser d1: 40 mm - 60 mm
- Durchmesser d2: 8 mm - 12 mm
Variant table
available in 7 variations
There is currently no further information available on this article.
Clamping elements are usually used in conjunction with rotary knobs and smaller handwheels.
In a simple way and without great design and assembly effort, spindles can be clamped sensitively with this. The clamping wedge is used to make the spindle difficult to move, e.g. to prevent adjustment due to vibration, or to secure it after the adjustment process.
In addition, this clamping element can be used to support the spindle.
The clamping element can be mounted so that the position of the clamping lever or clamping screw is either left or right.
We also offer reference arrows that can be attached to the circumference of the clamping element.
In a simple way and without great design and assembly effort, spindles can be clamped sensitively with this. The clamping wedge is used to make the spindle difficult to move, e.g. to prevent adjustment due to vibration, or to secure it after the adjustment process.
In addition, this clamping element can be used to support the spindle.
The clamping element can be mounted so that the position of the clamping lever or clamping screw is either left or right.
We also offer reference arrows that can be attached to the circumference of the clamping element.
Specifications
- B (mm): 16
- b (mm): 16
- m (mm): 28
There is currently no further information available on this article.
There is currently no further information available on this article.
Zu diesem Artikel sind aktuell keine technischen Zeichnungen verfügbar
There aren't any asked questions yet.