Ganter - High strength washers, high form
Available in 24 variations
Available in 24 variations
- Außendurchmesser d2: 17 mm - 68 mm
- Höhe s: 3 mm - 10 mm
- Innendurchmesser d1: 6 mm - 31 mm
- :
Variant table
available in 24 variations
There is currently no further information available on this article.
The washer generally has a great influence on the quality of a bolted joint. High-strength pretensioned screw connections can be achieved with washers.
A high residual clamping force significantly prevents the risk of "loosening".
For a given preload force, a thinner bolt can be used. This results in a better ratio of clamp length to bolt diameter, which counteracts failure.
The quenched and tempered, smooth bolt head/nut contact ensures low and uniform friction factors even with repeated loosening and tightening.
Washers are only suitable for mechanical engineering bolts of strength classes 8.8 / 10.9 / 12.9, not for structural steel bolts DIN 6914.
A high residual clamping force significantly prevents the risk of "loosening".
For a given preload force, a thinner bolt can be used. This results in a better ratio of clamp length to bolt diameter, which counteracts failure.
The quenched and tempered, smooth bolt head/nut contact ensures low and uniform friction factors even with repeated loosening and tightening.
Washers are only suitable for mechanical engineering bolts of strength classes 8.8 / 10.9 / 12.9, not for structural steel bolts DIN 6914.
Specifications
- : M 8
- f (mm): 1,5
- : 4
There is currently no further information available on this article.
There is currently no further information available on this article.
Zu diesem Artikel sind aktuell keine technischen Zeichnungen verfügbar
There aren't any asked questions yet.