Ganter - Eyebolts, stainless steel A4
Available in 5 variations
Variant table
available in 5 variations
The following application guidelines for stainless steel eyebolts DIN 580 must be observed, also with regard to the load capacity data listed in the table: The eyebolt must be fully screwed in and rest fully on the bearing surface. The mating thread must be as long as the length of the nut thread and the material of the bolt must be sufficient for the load capacity of the ring nut. Further application guidelines are contained in the operating instructions which are enclosed with each eyebolt (see also at www.ganter-griff.de/service). The official standard sheet still provides for the sizes M8, M30, M36, M42, M48, M56, M64, M72 x 6, M80 x 6 and M100 x 6.
Specifications
- : 2300
- : 1700
- : 1150
- : M 10
- e (mm): 8
- h (mm): 45
- l (mm): 17
- m (mm): 12
Zu diesem Artikel sind aktuell keine technischen Zeichnungen verfügbar
There aren't any asked questions yet.