Ganter - Stainless steel levelling elements
Available in 5 variations
Variant table
available in 5 variations
There is currently no further information available on this article.
Stainless steel levelling elements are used for levelling and adjusting within machines and plants. They consist of a levelling screw, a cheese head screw with washer and a spherical washer. After adjustment by means of the assembly tool available as an accessory, the screw is tightened firmly, whereby the levelling screw is spread by the spherical washer DIN 6319 underneath and is thus secured against rotation in the threaded hole. The values given in the table for w and x as well as for the static load capacity are to be seen as guide values which may deviate depending on the application situation. In general, they do not represent a guarantee of quality. Whether a product is suitable for the respective application must be determined by the user in each individual case.
Specifications
- : 3
- : 4,4
- : M 12 x 1
- : 19,1
- : 10,9
- : 9,1
- : 8
- : 2
- : 3
- : 8
There is currently no further information available on this article.
There is currently no further information available on this article.
Zu diesem Artikel sind aktuell keine technischen Zeichnungen verfügbar
There aren't any asked questions yet.