Halder - Centring mandrels
Available in 7 variations
Available in 7 variations
- Durchmesser d1: 12 mm - 77 mm
- Durchmesser d2 min.: 8 mm - 30 mm
Variant table
available in 7 variations
There is currently no further information available on this article.
For centering and clamping of components with location hole.
Material
Base body
- Steel, burnished
Tensioning screw
- Case-hardened steel
Assembly
The centring clamping mandrel must be adapted to the respective mounting diameter (e.g. by turning/milling). e.g. by turning/milling). It should be noted that the centring clamping arbor is expanded by approx. 0.1mm over the clamping diameter before machining. A nut is supplied for this machining.
Notes
Special design on request.
Specifications
- : 12
- : 31,5
- : 5
- : 5
- : 2
- : 4
- : 6
- : 12,2
- : M3
- : M6
- : 24,9
- : 19
- : 15
- : 31,5
There is currently no further information available on this article.
There is currently no further information available on this article.
Zu diesem Artikel sind aktuell keine technischen Zeichnungen verfügbar
There aren't any asked questions yet.