Adjustable clamping lever, screw with special pin
Available, delivery time: 1-3 days
Adjustable clamping levers are preferably used when the clamping range is limited or a specific clamping position is desired. The threaded insert is detachably connected to the handle by a serration. By lifting (pulling) the handle, the serration is released and the clamping lever can be swivelled into the most favourable clamping position. When "released", the handle automatically engages again. The MS / KU pressure spigot avoids pressure points or damage to the clamping point. With the hardened pressure pin (form DZ) a punctiform pressure point is achieved. The movable pressure piece (form KD) can be easily clipped on and also removed again. The thrust pieces are supplied unassembled.
| Farbe: | SW |
|---|---|
| Form: | MS, Druckzapfen Messing |
| Hersteller: | Ganter |
| Norm: | nicht angegeben |
| X-Line: | 1 |
| d1: | M 6 |
| d3 (mm): | 10 |
| d4 (mm): | 13 |
| d5 (mm): | 4 |
| h1 (mm): | 24,5 |
| h2 (mm): | 4 |
| h3 (mm): | 31 |
| h4 (mm): | 3,5 |
| l1 (mm): | 30 |
| l2 (mm): | 16 |
| l3 (mm): | 1 |
Login