Swing clamp, with screw-in thread, clamping arm with slotted hole
Product number:
17000391006
Available, delivery time: 1-3 days
Product information "Swing clamp, with screw-in thread, clamping arm with slotted hole"
Swing clamps are used when the clamping point must be freely accessible from above for inserting and removing the workpiece. The design enables particularly space-saving installation. The height of the swing clamp can be adjusted using the screw-in thread. During the clamping process, a 90° swivel stroke movement downwards takes place first, followed by the linear clamping stroke. The workpiece may only be clamped within the clamping stroke. The angular position of the clamping arm can be set as required when mounting on the swing clamp. When tightening the screw, the piston rod must not be subjected to any torque, so the clamping arm must be held against rotation.
| Form: | A, Spannarm mit Langloch und 2 Flankenscheiben |
|---|---|
| Größe (mm): | 25 |
| Hersteller: | Ganter |
| Hub: | 28 |
| Spannkraft FS bei 6bar (N): | 170 |
| X-Line: | 1 |
| a (mm): | 20 |
| b1 (mm): | 11,3 |
| b2 (mm): | 18 |
| d1 (mm): | 14 |
| d2: | M 40 x 1,5 |
| d3: | M 5 |
| h1 (mm): | 70 |
| h2 (mm): | 74 |
| h3 (mm): | 122 |
| k (mm): | 8,9 |
| l1 (mm): | 43 |
| l2 (mm): | 3 |
| l3 (mm): | 16 |
| m1 (mm): | 50 |
| w1 (mm): | 14 |
| Version: | R, rechtsschwenkend |
Login