Ganter - Oil sight glasses, aluminium / float glass, resistant up to 100 °C, blank
Available in 30 variations
Available in 30 variations
- Schauöffnung d1: 7 mm - 32 mm
- :
- :
Variant table
available in 30 variations
There is currently no further information available on this article.
The very sturdily dimensioned, scratch-resistant natural glass pane of the oil sight glasses is sealed by an O-ring around the circumference of the pane, so that the tightness is independent of an axial contact pressure. The outer Ø of the oil sight glasses with the recessed hexagon is matched to the screw-in holes for pipe fittings DIN 3852. The sealing ring is embedded in a radial and planar recess, thus the seal cannot be lost and cannot be squeezed out when tightening. Oil sight glasses can also be used for vessels that are under pressure. Test series on the load capacity at overpressure and underpressure are available. Mounting instructions: Use mounting nuts for wall thicknesses below 4 mm.
Specifications
- : G 1/2
- : 23
There is currently no further information available on this article.
There is currently no further information available on this article.
Zu diesem Artikel sind aktuell keine technischen Zeichnungen verfügbar
There aren't any asked questions yet.