Ganter - Safety handwheels without handle,fixed bearing flange
Available in 16 variations
Available in 16 variations
- Bohrung d2: 14 mm - 20 mm
- Handraddurchmesser d1: 160 mm - 200 mm
- :
Variant table
available in 16 variations
There is currently no further information available on this article.
Safety handwheels are characterised by maximum accident safety, as the handwheel is mounted on a stationary part, the bearing flange, when disengaged. The wheel is completely separated from the rotating shaft. The bearing flange can also provide the bearing support for the shaft via the bearing bush (code number 1). This bearing bush is a dry bearing (DU bush). As a rule, however, the shaft is supported separately and the bearing bush is used for centring the bearing flange. This centering can also be taken over by a centering ring (code number 2), if a corresponding bore is provided on the machine side. In this case, the bearing bushes can be omitted, bearing friction (heating) then does not occur.
Specifications
- Type: 1, mit Lagerbuchse
- : 26
- B (mm): 18
- : 71
There is currently no further information available on this article.
There is currently no further information available on this article.
Zu diesem Artikel sind aktuell keine technischen Zeichnungen verfügbar
There aren't any asked questions yet.