Ganter - Oil sight glasses, brass / ESG glass Form mit Reflektor
Item-No.: 05000969001
- Form: mit Reflektor
- Gewinde d2: G3/8
- Schauöffnung d1: 11 mm
There is currently no further information available on this article.
The very sturdily dimensioned, scratch-resistant natural glass disc of the oil sight glasses is sealed by an O-ring on the circumference of the disc and not on the flat side, so that the tightness is independent of the axial contact pressure. The outer Ø of the oil sight glasses with the recessed hexagon is matched to the screw-in holes for pipe fittings DIN 3852. The sealing ring is embedded in a radial and planar recess; this means that the seal cannot be lost and, above all, cannot be squeezed out during tightening. For the same reason, the seal can be held relatively softly, which benefits tightness even on uneven surfaces. Oil sight glasses can also be used with vessels that are under pressure. Test series on the load capacity at overpressure and underpressure are available. Mounting advice: Use mounting nuts for wall thicknesses below 4 mm.
Specifications
- : G 3/8
- : 20
There is currently no further information available on this article.
There is currently no further information available on this article.
Zu diesem Artikel sind aktuell keine technischen Zeichnungen verfügbar
There aren't any asked questions yet.