Ganter - Stainless steel spacer and foot washers, with rubber pad, vulcanized, mounting via mounting hole
Available in 18 variations
Available in 18 variations
- d1: 19 mm - 64 mm
- h: 3 mm - 26 mm
Variant table
available in 18 variations
There is currently no further information available on this article.
Stainless steel spacer and foot washers have a damping effect, reduce noise and protect surfaces from damage.
By using several spacer washers on top of each other, the spring rate of the package can be increased, resulting in further application possibilities.
Foot washers are used to set up smaller machines, systems or devices and are fastened with screws in the case of form A. The maximum screw head height must be observed. The max. screw head height must be observed. Alternatively, the Form B can be attached to all suitable and clean surfaces via the adhesive pad after removing the protective film.
By using several spacer washers on top of each other, the spring rate of the package can be increased, resulting in further application possibilities.
Foot washers are used to set up smaller machines, systems or devices and are fastened with screws in the case of form A. The maximum screw head height must be observed. The max. screw head height must be observed. Alternatively, the Form B can be attached to all suitable and clean surfaces via the adhesive pad after removing the protective film.
Specifications
- : 70
- h (mm): 3
There is currently no further information available on this article.
There is currently no further information available on this article.
Zu diesem Artikel sind aktuell keine technischen Zeichnungen verfügbar
There aren't any asked questions yet.