Halder - Side thrust pieces, smooth, with seal Durchmesser d1 6 mm
Item-No.: 05000272001
- Durchmesser d1: 6 mm
- Durchmesser d2: 3 mm
- Federkraft: 10 N
- Stift: Stahlstift
There is currently no further information available on this article.
Use for positioning and pressing such as in painting and sandblasting.
With seal against chips and dirt.
Material
Seal
- CR
Sleeve
- Aluminium Al
Spring
- Rust-free steel
Pin
- Steel, case hardened, zinc plated
Assembly
Assembly by press-fit.
Formula to calculate the center distance for the mounting hole:
l0 = z/2 + w + x,
l0 = center distance,
y = workpiece height,
w = workpiece length,
x = coordinate dimension,
s = stroke,
z = stop diameter
Calculate dimension x:
y greater than or equal to l2 - d2/2, then x = d2/2 - s
or
y less than l2 - d2/2, then x = d2/2 - s - [(l2 - d2/2 - y) * 0.123]
Characteristics
Light spring force design = stainless steel spring
Specifications
- : 6
- : 10
- : Stahlstift
- : 110
- : 7
- : 1
There is currently no further information available on this article.
There is currently no further information available on this article.
Zu diesem Artikel sind aktuell keine technischen Zeichnungen verfügbar
There aren't any asked questions yet.