Ganter - Flanges for ball joints GN 784
Available in 4 variations
Variant table
available in 4 variations
There is currently no further information available on this article.
Flanges are screwed onto ball joints from below, secured against rotation by a dowel pin. They thus allow the ball joints to be mounted from the top as well. The pitch circle d2 together with the three holes d3 are dimensioned so that commercially available standard screws can be used together with a washer. The dowel pin is mounted on the flange. The countersunk screw is enclosed loose.
Specifications
- : 23
- : M 5
- : 6
- : 8,5
- m (mm): 7
- : 2,5
There is currently no further information available on this article.
There is currently no further information available on this article.
Zu diesem Artikel sind aktuell keine technischen Zeichnungen verfügbar
There aren't any asked questions yet.