Ganter - Angle joints with rivet pin Bohrung d1 8 mm
Item-No.: 01000288021
DIN 71802
- Bohrung d1: 8 mm
- Form: mit Nietzapfen, ohne Sicherungsbügel
- Gewinde d2: M5
- Lenght l2: 4 mm
Angle joints DIN 71802 with rivet pin consist of ball cups DIN 71805 and ball pins DIN 71803. The swivel angle is 15° for the version with retaining clip (form BS) and 18° without retaining clip (form B). During assembly, the ball stud is pressed through the snap ring and held by it. If the holding force (see also minimum pull-off forces in the table) is not sufficient, the connection between the ball socket and the ball stud can be secured by the retaining clip. This is easy to mount or dismount. By using sealing caps, the angle joints are protected against contamination. The hexagon nut is included in the scope of delivery. Sealing caps must be ordered separately.
Specifications
- Pull-off force min. (N): 30
- : 7
- : 12,8
- : 10,5
Zu diesem Artikel sind aktuell keine technischen Zeichnungen verfügbar
There aren't any asked questions yet.