Ganter - Stainless steel insert bushings for round tube
Available in 9 variations
Available in 9 variations
- Außendurchmesser d1: 20 mm - 50 mm
- :
Variant table
available in 9 variations
There is currently no further information available on this article.
Stainless steel bushings are mounted by hammering them in with a soft-face hammer. The lamellas thereby bridge a manufacturing tolerance of the inner diameter or inner square of
±0.5 mm. This allows the mounting of screws in tubes.
The dimensions are based on construction tubes, but a check of the tolerance position of the tube is recommended.
±0.5 mm. This allows the mounting of screws in tubes.
The dimensions are based on construction tubes, but a check of the tolerance position of the tube is recommended.
Specifications
- : D20 / V20
- : 2
There is currently no further information available on this article.
There is currently no further information available on this article.
Zu diesem Artikel sind aktuell keine technischen Zeichnungen verfügbar
There aren't any asked questions yet.