Ganter - Clamping latches, steel, without safety catch
Item-No.: 05001254001
There is currently no further information available on this article.
Clamping latches are used to hold flaps, container lids, etc. securely. Due to the dead centre override, they hold vibration-resistant. As a result of the movement sequence of the clamping hook, the parts to be connected can be contracted by up to 15 mm during clamping. The adjustment range w2 is achieved via a spindle M6 of the clamping hook. The holding force given in the table is a guide value for the possible static tensile stress of the clamping fastener. Depending on the operating conditions, e.g. due to vibrations or impact stress, the holding force may be impaired. The counter hook is included in the scope of delivery.
Specifications
- : 110
- : 1100
- : 30
- : 52
- : 37
- : 19
- : 36
- : 20
- : 13
- : 22
- : 10
- : 15
- : 5,5
- : 16
- : 24
- : 35
- : 12
- : 63
There is currently no further information available on this article.
There is currently no further information available on this article.
Zu diesem Artikel sind aktuell keine technischen Zeichnungen verfügbar
There aren't any asked questions yet.