Halder - Clamping round, special hexagon socket wrench Gewinde d M2,5
Item-No.: 17000295001
- Gewinde d: M2,5
- Schlüsselweite: 3 mm
With the ball connector, parts can be connected quickly and easily in combination with the mounting bushings.
The mounting bushings are made of stainless steel. Two versions are available for mounting in wood (Figure 2 and Figure 4) and one for mounting in plastic (Figure 3). The two bushings (picture 2 and picture 3) allow 4x 90° locking, the bushing (picture 4) allows 360° rotation when locked.
The robust component is made of stainless steel. The ball connector is maintenance-free, noiseless and loss-proof.
Material
Bolt part
- Stainless steel 1.4305
Ball
- Rustproof steel
Spring
- Rustproof steel
Assembly
Assembly in wood (Fig. 2 and Fig. 4)
- Accommodating hole and pilot hole for locking screw according to specifications
- Optionally recommended to use adhesive for securing
- Press in socket
- Secure socket with screw
Note: The hole diameter (D2) for the pilot hole of the securing screw depends on the screw used.
Mounting in plastic (Fig. 3)
- Insert locating hole according to specifications
- Optionally recommended is to use adhesive for securing
- Screw in bushing
Note: The hole diameter to be selected for the locating hole depends on the hardness of the plastic.
Operation
Pressing the button unlocks the balls.
Marking
For l1 or l2 = 1.5: Marking line
Notes
Special design on request.
Specifications
- : 3
- : M2,5
- : 8