Halder - Centering clamping elements, with clamping segments, operation from below Durchmesser d1 max. 18,5 mm
Item-No.: 17000280001
- Durchmesser d1 max.: 18,5 mm
- Durchmesser d1 min.: 14,5 mm
For centering and clamping in blind holes of components with location hole. Precise self-centering with an accuracy of ±0.025mm. Due to the ground clamping segments, components with raw or machined surfaces can be force-centered and pulled down to the support points. The centering clamping element is characterized by large adjustment ranges and a low overall height.
Bolt-on option from above and below.
Material
Base body
- Tool steel, hardened, burnished
Spring
- Rust-free steel
Clamping segments
- Rust-free steel 1.4112, hardened and ground
Assembly
Installation instructions for assembly from above: Remove clamping plate and screw. Screw in grub screw from below and tighten from above via inner SW2.
Operation
Operation from below manual or automated (pneumatic or hydraulic realizable).
Specifications
- : 3
- : 2
- : 12
- : 2
- : M6
- : M6
- : 2,5
- : 5,5
- : 2,3
- : 4,5
- : 5,5
- : 10
- : 3,5
- : 18,5
- : 14,5
- : 12
- : M3
- : 2
- : 9,8
- : 8,6
- : 17
- : 5,5
- : 14,1
- : 12