Halder - Side thrust pieces, with plastic spring and pin Durchmesser d1 6 mm
Item-No.: 05000273001
- Durchmesser d1: 6 mm
- Durchmesser d2: 3 mm
- Federkraft: 10 N
- Stift: Stahlstift
There is currently no further information available on this article.
Use for positioning and pressing such as painting and sandblasting.
Material
Spring
- Plastic
Pin
- Steel, case hardened, burnished
Assembly
It is recommended to wet the sleeve.
Assembly by press-fitting.
Formula to calculate the center distance for the mounting hole:
l0 = z/2 + w + x,
l0 = center distance,
y = workpiece height,
w = workpiece length,
x = coordinate dimension,
s = stroke,
z = stop diameter
Calculate dimension x:
y greater than or equal to l2 - d2/2, then x = d2/2 - s
or
y less than l2 - d2/2, then x = d2/2 - s - [(l2 - d2/2 - y) * 0,123]
Identification
Light spring design = blue spring
Different pin shape (see drawing)
Specifications
- : 5,9
- : 10
- : Stahlstift
- : 100
- : 7
- : 3,7
- : 0,4
There is currently no further information available on this article.
There is currently no further information available on this article.
Zu diesem Artikel sind aktuell keine technischen Zeichnungen verfügbar
There aren't any asked questions yet.