Ganter - Safety clamping lever, lever inclined, steel
Available in 26 variations
Available in 26 variations
- Durchmesser d1: 21 mm - 33 mm
- Gewindelänge l1: 16 mm - 80 mm
- Connection thread d2:
Variant table
available in 26 variations
There is currently no further information available on this article.
Safety clamping levers are used when accidental, careless loosening or adjustment can lead to accidents.
Unactuated, the lever is not connected to the threaded insert, i.e. the clamping lever can be turned smoothly.
Only when the lever hub is pressed down do the two serrations engage, allowing release or tensioning.
After "releasing", the connection is released again by spring force.
Unactuated, the lever is not connected to the threaded insert, i.e. the clamping lever can be turned smoothly.
Only when the lever hub is pressed down do the two serrations engage, allowing release or tensioning.
After "releasing", the connection is released again by spring force.
Specifications
- : 37
- : 4,5
- : 62
- : 3
There is currently no further information available on this article.
There is currently no further information available on this article.
Zu diesem Artikel sind aktuell keine technischen Zeichnungen verfügbar
There aren't any asked questions yet.