Halder - Centering clamping elements, with clamping balls, operation from below Durchmesser d1 max. 14,2 mm
Item-No.: 17000281001
- Durchmesser d1 max.: 14,2 mm
- Durchmesser d1 min.: 11,7 mm
For spot centering and clamping in blind holes of components with location hole. Precise self-centering with an accuracy of ±0.025mm. Due to the clamping balls, components with raw or machined surfaces can be centered by force and pulled down to the support points. The centering clamping element is characterized by large adjustment ranges and a low overall height.
Screw-on option from above and below.
Material
Base body
- Tool steel, hardened, burnished
Spring
- Stainless steel
Clamping balls
- Stainless steel 1.4112, hardened and ground
Assembly
Installation instructions for assembly from above: Remove clamping plate and screw. Screw in grub screw from below and tighten from above via inner SW2.
Operation
Operation from below manual or automated (pneumatic or hydraulic realizable).
Specifications
- : 2
- : 10
- : 1,5
- : M5
- : M5
- : 2
- : 3,5
- : 1,3
- : 2,5
- : 3,5
- Number of balls n: 3
- : 4
- : 8
- : 0,5
- : 14,2
- : 11,7
- : 10
- : M3
- : 1,5
- : 3,9
- : 3,2
- : 12,7
- : 3,5
- : 11
- : 10