Adjustable clamping lever, die-cast zinc, with screw and support washer
Product information "Adjustable clamping lever, die-cast zinc, with screw and support washer"
Adjustable clamping levers are preferably used when the clamping range is limited or a specific clamping position is required. The threaded insert is detachably connected to the handle by a serration. By lifting (pulling) the handle, the serration is released and the clamping lever can be pivoted into the most favorable clamping position. When "released", the handle engages again automatically. The support washer is captive, does not rotate when tightened and protects the clamping surface from damage. A typical application is the use of clamping levers for slotted holes.
| Farbe: | SW |
|---|---|
| Hersteller: | Ganter |
| Norm: | nicht angegeben |
| X-Line: | 1 |
| d1: | M 5 |
| d2 (H7) (mm): | 13 |
| d3 (mm): | 10 |
| d4 (mm): | 13 |
| h1 (mm): | 24,5 |
| h2 (mm): | 4 |
| h3 (mm): | 31 |
| h4 (mm): | 3,5 |
| l1 (mm): | 30 |
| l2 (mm): | 12 |
| l3 (mm): | 0,4 |
| s (mm): | 2,5 |
Login