Guide rails WRC 21/15 | cpc Europa GmbH
Guide rails WRC21/15 from cpc Europa GmbH
- ARC/HRC linear guide rails are designed with four tracks in the O – variant. The steel balls transfer the force at a contact angle of 45 degrees. The O – arrangement provides higher torsional rigidity.
- Long lubrication intervals and thus minimal lubricant consumption. Re-lubrication options possible from all sides.
- High rigidity.
- Excellent dynamic properties: Vmax > 10 m/s, amax >500m/s².
- High static and dynamic moment load possible.
- Same load ratings for all directions.
- Compact design.
- Interchangeability.
- Guide rails can be screwed from above (countersunk head), as well as from below (thread).
- Standard reinforced steel covers on the end faces.
- Standard double lip seal.
- Special surface coatings are possible.
| cpc-Cross section: | 37 x 14,4 |
|---|---|
| cpc-slide length (mm): | 0 - 500 |
Login
WRC
WRC...C
