Handle strips, with labeling field
Available, delivery time: 1-3 days
A typical field of application for handle strips are doors of protective coverings on machines and devices. In addition, they are suitable as drawer handles. The screw channel for screws M6 allows any number of fixing screws at any point within the dimension l2. The aluminium profile is available in any length, the end caps are also available individually. Special lengths can be supplied even for comparatively small quantities. As delivered, the end cap is mounted on one side, so that the supplied paper / foil strip, after labelling, can be inserted into the groove provided. A ZIP folder with various templates (Word®, Open Office, PDF) is provided at www.ganter-griff.de/de/service/downloads, with which labelling can be created.
| Hersteller: | Ganter |
|---|---|
| Norm: | nicht angegeben |
| Oberfläche: | SW |
| X-Line: | 1 |
| b1 (mm): | 36 |
| b2 (mm): | 13 |
| b3 (mm): | 8 |
| h1 (mm): | 34 |
| h2 (mm): | 24 |
| l1 (mm): | 110 |
| l2 (mm): | 66 |
| l3 (mm): | 22 |
| t (mm): | 12 |
Login