Rastbolzen, demontierbar
Product number:
05001014015
Available, delivery time: 1-3 days
Product information "Rastbolzen, demontierbar"
Indexing plungers are designed in such a way that special versions of the indexing plungers can be realised economically even for small quantities. The indexing plungers can be machined as required or manufactured in-house according to the above drawing. Assembly is by means of countersunk screws and can therefore be carried out as often as required. All parts are supplied in an unassembled set. Form C / CK is used when the indexing pin should not protrude temporarily. For this purpose, the knob is turned by 90° after the pin has been retracted. The knob is held in this position by a detent notch.
| Federdruck Anfang (N): | 6,5 |
|---|---|
| Federdruck Ende (N): | 19 |
| Form: | B, ohne Rastsperre, ohne Kontermutter |
| Hersteller: | Ganter |
| SW (mm): | 14 |
| X-Line: | 1 |
| d1 (mm): | 7 |
| d2: | M 12 x 1,5 |
| d3 (mm): | 23 |
| d4 (mm): | 5 |
| d5: | M 3 |
| k (mm): | 20 |
| l1 (mm): | 6 |
| l2 (mm): | 8 |
| l3 (mm): | 20 |
| l4 (mm): | 48 |
| l5 (mm): | 22 |
| l6 (mm): | 6 |
| l7 (mm): | 31 |
| l8 (mm): | 17,6 |
| t (mm): | 7 |
| Material: | Stahl |
Login