Telescopic slide full extension GN 1414 | bis 36 kg | Otto Ganter GmbH & Co. KG
Cross section: 45,4 x 12,7 mm | Length: 300 - 650 mm | Soft-close | Disconnect
Product information "Telescopic slide full extension GN 1414 | bis 36 kg | Otto Ganter GmbH & Co. KG"
Otto Ganter telescopic slide full extension GN 1414
- Telescopic slides are installed vertically and in pairs. #
- The stroke reaches 100 % of the nominal length l1 (full extension).
- The rubber stop dampens the impact of the runner in the end position. This minimizes noise and increases the service life.
If greater static or dynamic loads occur in the extension direction, these should be absorbed by external stop elements. The telescopic slides are supplied as a pair. Due to the mechanical design, they can be installed on either the left or right side of the drawer. The accessibility of all mounting holes is ensured by auxiliary holes.
Other production-related holes may be present, but only the mounting holes are shown.
| Slide length (mm): | 550 |
|---|---|
| Load capacity (kg): | 31 |
| Cross section (mm): | 12,7 x 45,4 |
| Extract type: | Full extension |
| Travel path (mm): | 550 |
| Function: | Soft-close, Disconnect |
| Material: | Galvanized surface |
Login