Telescopic slide partial extension 010 | up to 100 kg | Extendable in both sides | Schock Metall CLASSIC
Cross section: 10,0 x 27,2 mm | Length: 340 mm | Extendable on both sides, with center detend
Product number:
07000188001
Available, delivery time: 1-3 days
Product information "Telescopic slide partial extension 010 | up to 100 kg | Extendable in both sides | Schock Metall CLASSIC"
Telescopic Slides Schock Metall® Partial-extension Series 010
Item price and sale per piece
Telescopic slides Series 010, hot-dip galvanized steel, width 10 mm, partial-extension with center detent
- Partial-extension
- Load capacity up to 15 kg per pair
- Extendable on both sides with center detent
- Length: 340 mm
- Extension length: 260 mm on both sides
- Hole pattern outer rail: 2 x M4 threads (58 - 224 mm)
- Hole pattern inner rail: 3 x holes D 6 mm (42 - 128 - 128 mm)
Material:
- Rails made of hot-dip galvanized steel
- Ball cages made of plastic
- Balls made of hardened C-steel
Temperature Range:
- Operating temperature +10°C to +40°C
- Storage and transport temperature -20°C to max. +80°C
Notes:
The center detent secures the guides extendable on both sides in the closed position.
The specified load capacities are maximum values for a vertically mounted telescopic slide pair with even load distribution using all designated mounting positions.
Mounting is vertical with side cutouts at the front of the drawer or horizontal with a shadow gap under the drawer. The load capacity in horizontal mounting is approximately 60% lower than in vertical mounting.
| Slide length (mm): | 340 |
|---|---|
| Load capacity (kg): | 25 |
| Cross section (mm): | 10,0 x 27,2 |
| Extract type: | Partial extension |
| Travel path (mm): | 260 |
| Special feature: | Mittenrastung, extendable on both sides |
| Material: | Galvanized surface |
Login