Telescopic slides full extension GN 1430 | up to 216 kg | Otto Ganter GmbH & Co. KG
Cross section: 70,9 x 18,4 mm | Length: 400 - 1200 mm | Soft-stop
Product information "Telescopic slides full extension GN 1430 | up to 216 kg | Otto Ganter GmbH & Co. KG"
Otto Ganter telescopic slide full extension GN1430
- Telescopic slides are installed vertically and in pairs.
- The stroke reaches 100 % of the nominal length l1 (full extension).
- The rubber stop dampens the impact of the runner in both end positions and takes over the locking function in the rear end position. This is manifested by a slight holdback when opening and closing. If greater static or dynamic loads occur in the extension direction, these should be absorbed by external stop elements.
The telescopic slides are supplied as a pair. Due to the mechanism, they can be installed on either the left or right side of the pull-out. The accessibility of all mounting holes is ensured by auxiliary holes. Other production-related holes may be present, but only the mounting holes are shown.
| Slide length (mm): | 800 |
|---|---|
| Load capacity (kg): | 212 |
| Cross section (mm): | 18,4 x 70,9 |
| Extract type: | Full extension |
| Travel path (mm): | 850 |
| Function: | Soft-stop |
| Material: | Galvanized surface |
Login