Ventilation / venting filter, low design
Product number:
13000015006
Available, delivery time: 1-3 days
Product information "Ventilation / venting filter, low design"
Ventilation filters are used when an air exchange between a closed interior and the environment is required. This effectively prevents underpressure or overpressure occurring in the system. The stainless steel wire mesh prevents airborne particles above a certain size from entering the interior from the outside and at the same time ensures that oil particles, for example, are separated and therefore do not enter the environment. A marking with the symbol "BE" (form A) or a blue colored ring (form B) indicate the filter function. The recommended installation position is vertically upwards. Installation note: Use fixing nuts for wall thicknesses of less than 4 mm.
| Form: | A, niedrige Bauform |
|---|---|
| Hersteller: | Ganter |
| Luftdurchlass (l/min): | 46 |
| Luftdurchlassvolumen (l/min): | 24 |
| SW (mm): | 14, 17 |
| X-Line: | 1 |
| d1: | M 10 x 1 |
| d2 (mm): | 14,5 |
| d3 (mm): | 12,5 |
| e1 (mm): | 16 |
| e2 (mm): | 18,5 |
| l1 (mm): | 6 |
| l2 (mm): | 6 |
| l3 (mm): | 8 |
| l4 (mm): | 7 |
| l5 (mm): | 16 |
| Material: | Messing |
Login