Venting valves, low design
Product number:
13000016010
Available, delivery time: 1-3 days
Product information "Venting valves, low design"
Venting valves vent a tank after the opening pressure specified in the table has been exceeded, thereby protecting against impermissibly high internal tank pressure. They are also characterized by their particularly compact dimensions. A marking (form A) or a colored ring (form B) in yellow (20 - 80 mbar) or green (160 - 240 mbar) is used to distinguish between different opening pressures. The simple operating principle, pressure spring / ball, ensures long-lasting and trouble-free use of the single-acting valve. The installation position is vertically upwards. Installation note: Use fixing nuts for wall thicknesses of less than 4 mm.
| Form: | A, niedrige Bauform |
|---|---|
| Hersteller: | Ganter |
| Luftdurchlass (l/min): | 18 |
| Luftdurchlassvolumen (l/min): | 12 |
| SW (mm): | 14, 17 |
| X-Line: | 1 |
| d1: | M 10 x 1 |
| d2 (mm): | 14,5 |
| d3 (mm): | 12,5 |
| e1 (mm): | 16 |
| e2 (mm): | 18,5 |
| l1 (mm): | 6 |
| l2 (mm): | 6 |
| l3 (mm): | 8 |
| l4 (mm): | 7 |
| l5 (mm): | 16 |
| Öffnungsdruck: | 20 |
| Öffnungsdruck2: | 80 |
| Material: | Messing |
Login